Installation Guide

Wallbox Pulsar Plus Installation Guide: Compact Premium Charger Specs, Cost & Setup

The Wallbox Pulsar Plus is the smallest 48-amp Level 2 charger on the market — about 6×6 inches, half the size of a ChargePoint Home Flex. It’s also the only major charger with an Ethernet port for hardwired internet, and it has the best native integration with home solar + battery systems. This guide covers Pulsar Plus specs, electrical requirements, install cost, app/network features, and how it compares to ChargePoint, Tesla, and Grizzl-E.

Updated April 2026  |  8 min read  |  Focus: Wallbox Pulsar Plus Installation

What Is the Wallbox Pulsar Plus?

The Wallbox Pulsar Plus is a 48-amp Level 2 EV charger made by Wallbox, a Spanish company with strong U.S. distribution. It’s the most compact premium charger on the market — about 6×6 inches with a depth of 4 inches. For comparison, the ChargePoint Home Flex is roughly 14×8 inches. If you’re mounting in a tight space (utility closet, narrow wall, near other electrical equipment), the Pulsar Plus often fits where competitors don’t.

Beyond the small footprint, the Pulsar Plus has two unique features in the residential charger market: Ethernet networking (only major charger with hardwired internet — useful in WiFi-poor garages) and native integration with Wallbox’s solar/battery system via the myWallbox app. If you have or plan to install solar panels and a home battery, the Pulsar Plus can dynamically charge from solar surplus, balance with battery state-of-charge, and automate time-of-use rate optimization.

At $649 hardware with a J1772 connector (universal — works with every EV including Teslas via included adapter), the Pulsar Plus is positioned in the premium tier with ChargePoint Home Flex ($749) and Tesla Wall Connector ($475 for Tesla-only / $550 universal). Total installed cost: $1,000-$2,400 for most homes.

Wallbox Pulsar Plus Specifications

Specification Detail
Max Output (hardwired) 11.5 kW / 48 amps
Max Output (NEMA 14-50 plug) 9.6 kW / 40 amps
Range Added Per Hour Up to 44 miles (hardwired)
Cable Length 25 feet
Connector Type J1772 (universal — works with every EV)
Form Factor ~6×6×4 inches (smallest premium charger)
Installation Hardwired OR NEMA 14-50 plug
Required Breaker (hardwired 48A) 60-amp double-pole
Connectivity WiFi + Bluetooth + Ethernet
App myWallbox (iOS + Android)
Weather Rating NEMA 4 / IP65 (outdoor rated)
Operating Temp -13°F to 122°F (-25°C to 50°C)
Power Sharing Up to 25 units on one circuit (myWallbox app)
Solar/Battery Integration Yes — native via myWallbox
ENERGY STAR Certified Yes
Price (hardware only) $649 (MSRP)

Installation Cost Breakdown

Most homes pay $1,000-$2,400 total installed for a Wallbox Pulsar Plus. Same cost structure as Tesla Wall Connector and ChargePoint Home Flex due to similar hardwiring requirements (60A breaker, 6 AWG wire). The key cost variable is panel capacity — Pulsar Plus’s full 48A output requires 60A breaker headroom, which most pre-1980 100A panels don’t have.

Cost Component Typical Range
Wallbox Pulsar Plus hardware $649 (MSRP)
Electrician labor $300-$1,400
Materials (wire, conduit, breaker) $150-$400
Permit $50-$300
Panel upgrade (often required) $1,000-$3,000 added
Total (no panel upgrade) $1,150-$2,750

When the Wallbox Pulsar Plus Is the Right Pick

The Pulsar Plus’s strengths are real but specific. Pick it when:

Don’t pick it if you need extreme cold tolerance (-25°C lower bound is fine for most of US, but Tesla Wall Connector and Grizzl-E rate to -30°C). Don’t pick it if you need NEMA 4X for monsoon/dust storms (Pulsar Plus is NEMA 4 — sufficient for most climates but not the most rugged option).

Wallbox Pulsar Plus vs. ChargePoint vs. Tesla vs. Grizzl-E

Feature Wallbox Pulsar+ ChargePoint Home Flex Tesla Wall Connector Grizzl-E Classic
Max Amps 48A 50A 48A 40A
Connector J1772 J1772 NACS J1772
Form Factor 6×6 in (smallest) 14×8 in 14×6 in 12×8 in
Networking WiFi + BT + Ethernet WiFi WiFi None
Weather Rating NEMA 4 / IP65 NEMA 3R NEMA 3R / IP55 NEMA 4 / IP66
Solar Integration Native Limited Tesla Powerwall only No
Lower Temp -13°F -22°F -22°F -22°F
Price $649 $749 $475 $399

Find a Vetted Wallbox-Experienced Installer

Free directory of 497 verified installers across 51 metros. Many specialize in Wallbox installs and myWallbox app + solar integration setup.

Find an Installer →

Frequently Asked Questions

Is the Wallbox Pulsar Plus worth $200 more than a Grizzl-E Classic?

Depends on your priorities. The Pulsar Plus has WiFi + app scheduling + solar integration + Ethernet — useful if you want smart features. The Grizzl-E is non-networked, more rugged (NEMA 4 / IP66 vs NEMA 4 / IP65, fire-rated cast aluminum vs polycarbonate), and $250 cheaper. If you don’t care about app features and your environment is harsh (Boston winters, AZ heat + dust), Grizzl-E is the better choice. If you have or plan solar/battery and want app-based scheduling, Pulsar Plus.

Will the Wallbox Pulsar Plus charge a Tesla?

Yes. The Pulsar Plus uses J1772 — universal Level 2 standard. Every Tesla ships with a J1772-to-NACS adapter. Plug Pulsar Plus’s J1772 handle into the adapter, plug adapter into Tesla, charge at full 48A.

Why does the Pulsar Plus have an Ethernet port?

Garage WiFi signal is unreliable for many homes — concrete walls, distance from router, interference from other devices. Ethernet gives you a hardwired internet connection for cloud features (smart scheduling, ConnectedSolutions enrollment, ENERGY STAR rebate verification) without depending on flaky WiFi. No other major residential charger has this.

Does the Pulsar Plus actually charge from solar surplus?

Yes — natively, via the myWallbox app. The setup integrates with most major solar inverter brands (Enphase, SolarEdge, SMA) and home batteries (Powerwall, Enphase IQ Battery, LG RESU). The charger reads real-time solar production + house load + battery state-of-charge, then ramps your EV charging to absorb excess solar without pulling from the grid. ChargePoint Home Flex has a similar feature but it requires more setup; Tesla Wall Connector only integrates with Powerwall.

Does the Pulsar Plus qualify for the federal 30C tax credit?

Yes. The Pulsar Plus qualifies as Alternative Fuel Vehicle Refueling Property under 30C. Recover 30% of installed cost up to $1,000 if your home is in a qualifying census tract. Credit expires June 30, 2026. Check your address in our 30C eligibility guide.

Hardwired or NEMA 14-50 plug — which should I choose?

Hardwired gives you the full 48A output and is required for outdoor mounts in most local codes. NEMA 14-50 plug-in caps you at 40A but is removable (useful if renting or planning to move). Either install supports the same myWallbox features. Hardwired install adds $50-$150 in labor; plug-in needs the outlet professionally installed first ($150-$300).


Popular Level 2 EV Chargers

Top-rated chargers compatible with any certified installer. Prices may vary.

ChargePoint Home Flex
$699
50A · 23 ft cord
Most popular — WiFi, adjustable amperage
View on Amazon
JuiceBox 40
$589
40A · 25 ft cord
Smart scheduling, energy tracking app
View on Amazon
Grizzl-E Classic
$399
40A · 24 ft cord
Best value — rugged, NEMA 4 rated
View on Amazon
Wallbox Pulsar Plus
$649
48A · 25 ft cord
Compact design, Bluetooth + WiFi
View on Amazon
Emporia EV Charger
$449
48A · 24 ft cord
Budget smart charger, energy monitoring
View on Amazon

As an Amazon Associate, we may earn from qualifying purchases. This does not affect our recommendations.